Free Online Practice Simulator

TI-34 MultiView Calculator

Left your calculator at school? This free TI-34 calculator online works like the TI-34 MultiView™, so you can do fractions, powers, square roots, π and trig right in your browser. Laptop, tablet or phone, it doesn't matter.

PRACTICE SIMULATOR TI-34 MultiView style
DEG ☀️ Solar Power
 
 
 
0

Unofficial practice simulator. Not made by or affiliated with Texas Instruments.

📱

4-Line Display

Your last three answers stay on screen above the line you're typing. Need one again? Tap ▲ and bring it back.

➗

Real Fractions

Type 2 n/d 3 and you get a proper stacked fraction, not 0.666… Answers stay exact (think 11/12), and f◄►d flips them to decimals.

📐

Trig, Powers & Roots

sin, cos and tan in degrees or radians. Squares, powers, square roots, reciprocals and π are all one tap away.

How to Use This TI-34 MultiView Calculator Online

I built this page as a working copy of the TI-34 MultiView™ key layout and its 4-line screen. That's the calculator a lot of middle school classes ask for in pre-algebra, algebra I and geometry. So if yours is sitting in a locker, or you just want the keystrokes in your fingers before a test, you're in the right place.

Using this TI-34 MultiView calculator online is simple. Tap the keys (or type on your keyboard), hit enter, and the answer shows up at the bottom. Older sums slide up the screen, which makes it easy to compare two answers side by side. And nothing leaves your browser. There's no install, and what you type isn't sent anywhere.

Why Use a TI-34 Calculator Online?

Mostly because the real one isn't always with you. Students use this TI-34 calculator online to finish homework on a laptop or phone, or to rehearse the exact key order before a quiz. Parents like it too. You can sit next to your kid and press the same buttons they press in class, even if you've never owned a TI-34 calculator.

Teachers, put it up on the projector. It's a quick way to walk a whole class through fractions, powers or trig on one big TI-34 MultiView calculator. Since it's just a web page, it runs fine on school Chromebooks, tablets and phones.

What Each Key Does

n/d Fractions

Numerator first, then n/d, then the denominator. The fraction shows up stacked, like in your textbook. Results stay exact too, so 2/3 + 1/4 comes out as 11/12 rather than a long string of decimals.

f◄►d Fraction ↔ Decimal

Got an answer? Press f◄►d and it switches between fraction and decimal (3/8 becomes 0.375, and back again). It works on tidy decimals as well: 0.75 turns into 3/4. Something like √2 can't be a neat fraction, though, so that one stays a decimal.

xⁿ x² √ x⁻¹ Powers and Roots

xⁿ handles any power: 2 xⁿ 5 gives 32. x² squares whatever sits right before it, whether that's a number or a bracket. For √, start the root, type the number, then close it with ) or simply press enter. And x⁻¹? That's the reciprocal. 4 x⁻¹ = 1/4.

(-) Negative Numbers vs - Subtraction

This one catches a lot of students out. (-) makes a number negative; - subtracts. Type (-)3 x² and you'll get −9, not 9, because the calculator squares first and applies the minus after. Real scientific calculators behave the same way. Want 9? Use brackets: ( (-)3 ) x².

sin cos tan and mode

Degrees are the default. You'll see DEG in the top-left corner. Press mode once for radians (RAD), and once more to go back.

Editing: ◀ ▶ ▲ ▼ delete clear

Made a typo? Don't wipe everything. Move the cursor with ◀ ▶ and fix just that bit. delete removes whatever is to the left of the cursor. clear empties the entry line, and pressing it again on an empty line clears your history too. With ▲ ▼ you can pull an old entry back down, change it, and run it again.

Using Your Last Answer

Start a new line with +, ×, ÷, xⁿ, x² or x⁻¹ and the calculator slips ans (your last answer) in front for you. The handheld does exactly this. So after 5 enter, typing × 2 enter gives 10.

Keyboard Shortcuts

On a laptop or desktop you don't have to click every key. Your keyboard works too:

Keyboard keyWhat it does
0–9 and .Digits and decimal point
+ and -Add and subtract
* or xMultiply (×)
/Divide (÷)
^Power (xⁿ)
( and )Brackets
pπ
Enter or =Calculate
BackspaceDelete
Esc or DeleteClear
Arrow keysMove the cursor and scroll history (click any calculator key first)

Step-by-Step Examples

Try these three on the calculator above. I've listed every key press, plus the answer you should end up with.

Example 1: Adding Fractions with Unlike Denominators

Problem: Calculate 2/3 + 1/4

  1. Press 2 then n/d then 3
  2. Press +
  3. Press 1 then n/d then 4
  4. Press enter
Answer: 11/12. Press f◄►d and you'll see 0.9166666667.

Example 2: Area of a Circle Using π

Problem: Find the area of a circle with radius r = 6 (A = π × r²)

  1. Press π
  2. Press ×
  3. Press 6 then x²
  4. Press enter
Answer: 113.0973355 square units

Example 3: Negative Numbers and Order of Operations

Problem: Calculate (−4)² − 3 × 2

  1. Press ( (-) 4 ) then x²
  2. Press - 3 × 2
  3. Press enter
Answer: 10. That's 16 − 6, since × happens before −.

Error Messages and What They Mean

SYNTAX ERROR

Something's missing, or it's in the wrong spot. Two operators side by side (5 + × 2), an empty fraction and a stray closing bracket are the usual suspects.

DIVIDE BY 0 ERROR

Somewhere in the sum you're dividing by zero. 0 x⁻¹ counts, and so does a fraction with 0 on the bottom.

DOMAIN ERROR

The function can't take that number. Square roots of negatives do this, and so does tan 90° in degree mode.

Press any key to get your entry back. Then use ◀ ▶ and delete to fix it.

TI-34 MultiView vs. Other Scientific Calculators

Most students end up with one of these three. There's a simulator for each on this site, but for the full function list of the real thing, the official guidebook is your best bet.

ModelUsually used forDisplayPractise online
TI-34 MultiView™Middle school (grades 5–9): fractions, pre-algebra, algebra I, geometryMulti-line (4 lines)This page
TI-30XS MultiView™High school algebra, geometry, trigonometry and GED prepMulti-line (4 lines)TI-30XS style simulator
Casio fx-300ESHigh school algebra, geometry and trigonometryNatural textbook displayfx-300ES style simulator

Frequently Asked Questions (FAQs)

Is this TI-34 calculator online free?
Yes, totally free. No account, no download, no add-ons. Just open the page and start.
How do I switch between degrees (DEG) and radians (RAD)?
Press mode. Keep an eye on the top-left corner of the screen: it flips between DEG and RAD.
Can I use my computer keyboard?
You can. Numbers, + - * / ^, brackets, Enter, Backspace and Esc all work, and p gives you π. The full list is in the Keyboard Shortcuts table above.
Can I use this simulator during a test?
No, online simulators aren't allowed in tests. The physical TI-34 MultiView is accepted on plenty of exams, but rules vary by test and by state, and they do change. Check the official calculator policy (College Board's, for the PSAT 8/9) before test day.
Does it work on phones and tablets?
Yes. The keypad works in mobile browsers on iPhone, iPad and Android. No app needed.
Do I need to sign up or install anything?
Nope. Everything runs in your browser.
What is the difference between the TI-34 MultiView and the TI-30XS MultiView?
Both are multi-line scientific calculators from Texas Instruments. The TI-34 MultiView is built for middle school and has a few extras for fraction and whole-number work, like integer division with a remainder. The TI-30XS MultiView targets high school and GED courses. Since the exact functions differ, the official guidebooks are worth a look. Or just try our TI-30XS style simulator and compare.
How do I change a decimal answer into a fraction?
Press f◄►d once the answer is on screen. 0.75 becomes 3/4; press it again to switch back. Answers like √2 or π can't be written as a simple fraction, so they stay as decimals.
Can I calculate statistics such as the mean and standard deviation?
Not yet, sorry. The statistics (data) menu from the physical calculator isn't built in. Our Data & Statistics Guide walks through the steps on a real TI-34 MultiView. For a quick mean, add the numbers and divide: (4 + 8 + 6) ÷ 3 = 6.
Why does (-)3 x² give −9 instead of 9?
Squaring comes before the negative sign, so the calculator reads it as −(3²). Real scientific calculators work the same way. Wrap it in brackets, ( (-)3 ) x², and you'll get 9.
Will my history be saved if I refresh the page?
No. History only lasts while the page is open. You can scroll back through recent entries with ▲ ▼, but a refresh or closing the tab wipes them.
Which browsers are supported?
Any recent Chrome, Safari, Firefox or Edge, on desktop or mobile. No plugins.
Can teachers use this in the classroom?
Absolutely. Put the page on a projector or interactive whiteboard and show keystrokes to everyone at once. Browser zoom (Ctrl and +, or ⌘ and + on a Mac) makes the calculator bigger.
Is this website made by Texas Instruments?
No. TI34Calc is an independent educational site, not affiliated with, endorsed or sponsored by Texas Instruments. TI-34 MultiView is a trademark of Texas Instruments. There's more in our Disclaimer.

Learn More

Want to go deeper? Our step-by-step guides cover fractions and mixed numbers, powers, exponents and roots, π and trigonometry, integer division with remainders, and data and statistics. Curious who's behind the site? The About page has that.